Description:
The cupric selective electrode is a solid state membrane electrode. The membrane consists of a robust highly compressed Cu2Se/Ag2Se sensor element embedded in a plastic shaft by means of a special resin. A silver contact layer is used for potential discharge.
Range: |
1·10-6…1·10-1mol/l, 0,1…6000 mg/l |
Slope: |
27 ± 2 mV/p Cu2+ |
Response Time: |
< 30 s (in 600 mg/l Cu2+- Solution) |
Stability: |
± 0,3 mV (30 min), ± 1 mV (24 h) |
Interfering ions: |
Zn2+/Cu2+= 5000 |
pH: |
2 .. 14 |
Temperature: |
0…50 °C |
Resistance: |
< 0,1 MΩ |
Sensor: |
Cu2Se/Ag2Se |
Shaft material: |
Plastics (black) |
Dimension: |
Length: 145 mm |